Our 5G Wireless Internet WiFi System – WiFiX NEXS2GO with Quectel RM502Q-AE 5G Modem is all you need for a complete 5G cellular hotspot router using the high performance Quectel RM502Q-AE 5G wireless cellular modem together with the WiFiX NEXS2GO router.
Assembly is included
The Quectel RM502Q-AE 5G Modem is a 4×4 MIMO modem, meaning it uses 4 separate antennas. That means that you have to add a second pair of antennas to the modem adapter enclosure. This kit includes a full set of 4 antennas as well as the four needed antenna connectors for the modem to router. The modem adapter enclosure is needed, as the Quectel RM5xx series modems do not fit inside the NEXS2GO. This works only with our USB3 to M.2 Modem Adapter Enclosure.
This kit can be paired with our convenient to mount all in one 4×4 MIMO outdoor antenna for a strong signal when outdoor antennas are needed for signal improvements, or a pair of our High Beam X2 antennas for even more boost. We also have an all in one antenna bundle for mounting this router and modem in our outdoor 4×4 MIMO antennas enclosure.
The Quectel RM502Q-AE is a very powerful modem and has power requirements that can be more than the stock power adapter that comes with most routers. It is recommended to add a quality cell phone style plug-in charger with Micro-B USB connector for auxiliary power input. We want to make sure you have all the amps you will need to deliver reliable modem power.
NOTICE: The Quectel RM502Q-AE is also a Category 20 LTE modem. LTE and 5G in one modem. This is a “5GNR” modem. It supports “New Radio” 5G bands, it does not support mmWave 5G bands.
For full details of each product, please see their individual listing pages below:
NEXS2GO Gigabit Cellular Router
Quectel RM502Q-AE 5G Cellular Modem
USB3 to M.2 Key B 4G 5G Modem Adapter Enclosure with SIM Card Slot – V7 – Sierra Quectel Fibcom SimCOM 5G Supported
Qty 2 – 5″ MHF4 to SMA FBH 1.13mm Pigtails
WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems
600-3800MHz Cellular Omni-Directional Paddle Antennas (SMA Connectors) PAIR
700-3800MHz 5dBi Cellular Hotspot Omni-directional Antennas (SMA Connectors) – Pair
700-2700MHz 4dBi 4G 5G Hotspot Omni-Directional Antennas (SMA Connectors) PAIR
5 In 1 SIM Card Adapter Kit With Emery Sanding Board
Copper Heatsink for 5G Modems – 4mm – Low Clearance – Highly recommended!
The Wireless Haven Modem Firmware Update Service
PLEASE NOTICE: Cellular service providers may require activating a specific hotspot data plan to use on a cellular internet device. The carriers are constantly updating and/or modifying existing cellular plans. It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.